Neptune Systems 10.00 pH Calibration Fluid, Sobre de Calibración2
Keep your pH probe calibrated!
Neptune Systems single-use pH calibration packets make calibrating your pH probe simple and fast. Just tear open the top, and a stick your probe into the solution when performing the calibration procedure.
Over the course of a couple months, it is common for pH probes to not read exactly correct and that can be fixed by calibrating your probe. Almost all monitoring devices will allow you to calibrate your pH probe, and a majority of them will let you calibrate your probe to a high and a low point. For saltwater aquariums, it is best to use a calibration solution with a pH of 7.0 for the low point and 10.0 pH for the high.
We recommend calibrating standard pH probes every 3 months or as needed, where double junction pH probes can go up to 6 months before calibration is required.
1x 10.00 pH Single Use Calibration Packet
Milwaukee PH Monitor MC120
Neptune System Pm1 Module PH or ORP, Temperature, IO Expansion / Sensor de Modulo
Neptune Systems 7.00 pH Calibration Fluid, Sobre De Calibración
PINPOINT pH Monitor
Salifert pH Test
To install this Web App in your iPhone/iPad press and then Add to Home Screen.